-
Touch Local Ltd
- © 2012 All rights reserved
-
Directory Links
- Directory
- Popular Companies
-
About Touch Local
- About Us
- Privacy Policy
- Terms of Use
Look for more: Colleges in BRISTOL
Gas Safe Registered Egineer and Qualfied Plumber. For more Details visit our website: www.jt-plumbing-heating.co.uk
Did you know a full and complete boiler service takes 2 hours and should always include the following.Check what other gas appliances are in the property.Check with customer whether there are any problems with the system.Check the appliance location is suitable for the type of appliance.Check the appliance for any damage before starting work on it.Check for correct operation of the appliance, including consumer controls and the safety devices.Check the flame for correct burning flame picture.Check the electrical wiring complies with electrical regulations.Check for correct clearances from combustible materials.Examine gas supply pipe work for correct installation and clearance.Check for correct ventilation to the room containing the appliance.Perform a full gas tightness test (checking for an existing gas leak).Full service procedure:Strip down appliance.Remove main burners, clean and inspect for damage.Clean and inspect gas injector(s).Dismantle and clean pilot assembly and gas injector.Reassemble burners and pilot assembly.Check condition of ignition leads and electrode.Clean the heat exchanger.Refit burner assemblies and check seals.Test disturbed gas joints for leaks.Check appliance case and seals (where appliance is room-sealed) for damage and correct assembly.Check and adjust pilot flame.Check operation of thermocouple or flame supervision device.Measure gas inlet and burner pressures and adjust if necessary.Gas rate appliance to check it is burning the correct amount of gas.Inspect/test flue for faults/correct operation.Check CO/CO2 ratio levels and adjust if necessary.Inspect flue terminal for correct location and protection.Check system bypass valve (if fitted) is correctly adjusted.Check sealed system (if fitted) is at correct pressure.Advice user of any defects found and with customers permission repair.Apply the Industry Unsafe Situations Procedure if necessary.Issue the customer with service documentation.
Service, install and repair: Boilers, Fires, Cookers and Range Rated Cookers
Gas Safe, City & Guilds
Be the first to review this business.